Qt® Room Control

The Qt® Room Control (QtRC) can be used to adjust the sound masking level for an individual room or a space with 2-8 emitters. This wall mounted volume control unit is designed to work with any of the Cambridge Sound Management sound masking systems. It installs easily in new or existing construction and fits in most standard electrical boxes, including open back, low voltage brackets. Since the QtRC is designed for a room of up to 8 emitters, a separate zone should be used in larger areas. The QtRC controlled room can be its own run from the controller or part of a run to other areas. For more information, refer to the Qt Room Control Installation and Operations Guide.

Qt Room Control Introduction Video

  • Height:

    4.1” (10.4 cm)

  • 4.1” (10.4 cm)
  • Width:

    1.9" (4.8cm)

  • 1.9" (4.8cm)
  • Depth:

    2.2” (5.6 cm)

  • 2.2” (5.6 cm)
  • Weight:

    4.7 oz. (133 g)

  • 4.7 oz. (133 g)
  • Frequency Response:

    +/- 1 dB in 1/3 Octave bands over entire speech range as equalized by the control module

  • +/- 1 dB in 1/3 Octave bands over entire speech range as equalized by the control module
  • Maximum Output:

    57 dB based on controller setting

  • 57 dB based on controller setting
  • Max. Emitters Supported:

    8 Emitters

  • 8 Emitters
  • Wiring:

    CAT 3, 5, 6 cables

  • CAT 3, 5, 6 cables
  • Mounting Configuration:

    Supports 1-gang low voltage class 2 backless brackets (as shown to the right) or standard 1-gang electrical boxes

  • Supports 1-gang low voltage class 2 backless brackets (as shown to the right) or standard 1-gang electrical boxes
  • Connections:

    3x RJ45 jacks (3x RJ45 jacks. INPUT (from control module or previous room): Use IN. OUTPUT to next room: Use OUT. Connect Emitters in Room: USE ROOM)

  • 3x RJ45 jacks (3x RJ45 jacks. INPUT (from control module or previous room): Use IN. OUTPUT to next room: Use OUT. Connect Emitters in Room: USE ROOM)
  • NOTE:

    The Qt Room Control is not compatible with the Qt Oasis (SPS 30/300)

  • The Qt Room Control is not compatible with the Qt Oasis (SPS 30/300)
  • Qt® ROOM CONTROL INSTALLATION
    The Qt Room Control is a wall mounted device, which installs in a single gang box with a stainless steel faceplate and silk screened graphic. There are special grounding requirements.