Qt® X 300/300D
Qt® X 600/600D
Qt® X 800/800D
Qt® X 805/805D
Qt® Conference Room Edition
Qt® Patient Privacy System
The DS1092 features digital masking generator with adjustable low pass filter for tuning. The DS1092 incorporates a mixer to introduce paging and music signals into the system. A 40-watt amplifier provides power for up to 40 speakers, or approximately 10,000 square feet.
Qt emitters are the backbone of the QtPro Sound Masking System. Qt emitters are wide dispersion direct field speakers with 1.25” (3.17 cm) drivers and are smaller than a coffee mug, making them the smallest available. These emitters deliver four uncorrelated audio channels, which provide uniform, unobtrusive sound masking.
Qt® Active Emitters
Qt Active emitters are an all-in-one solution for sound masking, paging, and music playback. They provide excellent paging intelligibility and uniformity, leveraging our direct field technology and facilitating paging even in noisy environments. Qt Active emitters also offer a sound-masking profile spanning low frequencies, to blend well with background building noise.
The DS1320 Qt active emitter, Fusion Edition is compatible with the DS8000. It fuses QtPro direct-field technology with DynasoundPro networked sound masking, providing the most uniform coverage and precise control available in the sound masking industry. This makes it easier to mask buildings with varied ceiling architecture – for example buildings with both open-plenum and drywall ceilings.
The DS1339 contains a 5.25-inch diameter speaker mounted on axis. The compact enclosure includes a convoluted, flame retardant, acoustical insert to eliminate standing waves and metallic resonance. Dynasound’s DS1339 sound masking speaker is designed for quick and easy installation into open structure architecture and above suspended ceilings.
The DS1375 contains a five inch diameter speaker. The compact enclosure includes a flame-retardant, acoustical insert to eliminate standing waves and metallic resonance. Dynasound’s DS1375 sound masking speaker is designed for quick and easy installation into suspended acoustical tile or drywall ceilings.
The DS1390 contains dual, horizontally opposed speakers which produce uniform sound dispersion ideally suited for reverberant under floor cavities and ceiling plenums. An optional mounting bridge is available for use in ceiling plenums where conventional sound masking speakers are not applicable (specify DS1390B).under floor cavities and ceiling plenums. An optional mounting bridge is available for use in ceiling plenums where conventional sound masking speakers are not applicable (specify DS1390B).
The DS2400 pipe, duct, and wall sound masker is used to protect pipes, ducts, and walls against human and electronic eavesdropping by filling them with full bandwidth sound masking. The unit may be attached to the exterior of any pipe or duct, whether square or round. It may also be attached to the vertical surface of any partition wall.
The DS2500 series sound maskers are used to protect windows, walls and doors against human and electronic eavesdropping by applying full bandwidth sound masking. The unit may be attached to the interior side of any window, door or in some cases wall surfaces. In all applications the integrity of the surface remains intact.
Qt Command Center
Drywall Roughin Bracket
Ceiling Conduit Mount
Equipment Rack Mount Kit
Qt Room Control (QT-RC2)
Qt Room Control (Qt-RC3)
DynasoundPro Privacy Manager
DSSB-4 Tile Bridge
The DS2022 return-air grill attenuator is designed for quick and easy installation into ceiling return-air grills in 2×2 suspended ceiling grid systems. The DS2022 is used to acoustically treat open return-air grills for sound masking uniformity by attenuating the amount of sound that can pass directly through